

this is my peer grading of my work from A1 and my tutor grading. i am happy with both, i had a hard first term and wasn’t in college enough to make my work any what to the higher standard. but now i plan to improve that and hopefully hugely improve my grades. i plan to balance my blog and practical work equally to ensure they are both kept up to date and show my process of learning as it comes to me for a more detailed and expressionate piece of work
models and uv:
Throughout this block of my production page I show the process of how modelling, uv unwrapping, texturing and using unreal all tied together in my own experience in making my diorama. in this section specifically it shows my modelling work.

This is a very basic model I made to be a lily plant in my pond within my scene. it was a small task and an easy model but I feel it adds what was missing in my diorama, like a final touch since lily pads weren’t in my initial concept art and early sketches.



This is my modelling shown for my palm trees, everything is has been uv unwrapped and they are complete for texturing. I had to experiment with a lot of trial and error to try get my leaves to my desired look. they aren’t accurate to exact palm trees but they are my own adaptation. I experimented with cubes at first yet found those too difficult to work with, so I chose to use planes. I added lots of loop cuts and them used the knife tool to cut my leaf grooves into it. I then used proportional editing to stretch the leaves out to make them fall more naturally rather than just flat.


This is my model for my desert house, I am having a lot of struggle uv unwrapping it since it has grooves and ledges and I’m not entirely confident with uv on more difficult shapes. I am awaiting my Friday morning lesson with my blender tutor to ask for support. I learned if you look at the model from a straight on perspective you just have to mark every seam that is exposed or on the edge, this helped throughout my whole project because I knew I could give every model I made a good shot at unwrapping on my own.



This is my model for my cart, I am currently struggling to figure out how to uv unwrap my wheel for the cart but have asked am receiving help with it. this model wasn’t complicated at all and quite peaceful to make and feel confident making it. I think once textured it will fit my diorama well and I am excited to see how it will turn out. (edit) after a week of trial and error I received help from my tutor who teaches the blender software she helped me to understand there there was problems with my model that I and to fix first and now I feel confident to go into to creating my remaining models with a keener eye.

This is my model along with my uv for my barrel. it was very simple to make only taking a short amount of time to make. I think it will look a lot better when I get to texturing it and I’m excited to see how it will turn out. Originally I was going to do cube crates but I decided it didn’t fit with the look I wanted to for so i chose a barrel instead.


This is the model for my selling stand, I focused on a look more traditional to middle eastern style since my reference was from assassins creed mirage and I really took a liking to an image I saw from the game. I like how it has a different style from how a selling stand would be typically imagined. I think it open up fun ways to retexture and bring some colour into my desert setting which is something I was worried would be hard to achieve and my diorama would look super bland.


This is a close up photo of the roof to my selling stand. The uv was quite easy , following just a simple shape.

This is my uv for my plant i made to go around my pond

This is my uv for my house. I faced a lot of struggles trying to figure out the uv and it took me over two weeks and lots of advice to be able to eventually get it. I learned it was because I had errors in my model and had to fix some glitched faces on some overhangs.

this is the model and my uv for my wheel on my cart. this uv also took me a long time to complete because i again had glitched double faced areas. it took me alot of trial and error and having to rebuild the model twicee to be able to finally uv unwrap it.

this is all my uvs put together for my entire cart, I just uv each shape I used when I first started to build it and then copied and pasted those basic models so the uv would transfer over.

this is just to show the uv and model for my barrels. it took me many attempts so be able to create my barrels correctly since at first i wasn’t using the correct amount of loop cuts and my barrel would just get this strange sharp point in the middle rather than the actual curved shape of a barrel for many attempts i was confused as to what i was doing wrong however, with one view of another persons way of creating a barrel i knew what my issue was and it was a quick and easy fix that i had to look at beyond my initial frustration.

this shows my lily pad model and uv and some of the reference images i used. I wanted just the most simplistic shape and I didn’t want to include any flowers since I didn’t think it would fit my diorama since I want to keep the neutral earthy tones. (edit: i later changed and decided i would like some pops of colour through out my textures to break up the similarities between the colour scheme i had at first and i think i worked effectively)
texturing:

this is the beginning of my barrel texturing i am currently layering colours before i add the raised wooden texture. This is the model in basic viewing form, I plan to add textured wood patterns and layer the patterns alongside different colours and heights, this creates the aspect of a more natural shape, since bark or a rough wooden texture won’t be smooth or even.


This shows my uv view for my small waterside plants, I like how each leaf has a different colour and texture scheme with some having much more contrasting tones of green and others sticking to a darker or lighter shade.
This is also showing my model and beginning texture for my small water plants. I wanted to show how it comes together throughout the process, showing my thought process as the texturing comes together with the model.


This is my plain model vs my textured model, I wanted a small hint of colour on this model since it correlates with the hint of colour I have on my selling stand, I didn’t want too bright of colours but I wanted to keep some symbol of the Middle Eastern culture, although my theme was deserted village I wanted it to look like the residents had JUST left.


This is my texture for my palm tree i had no troubles with this texture, i really enjoyed making it, i like how my leaves have gradient and contrast between colours and howe my tree stump has darker patches and a raised texture.


this is the texture for my lily pads, i really enjoyed creating the cartoony effect since i didn’t know how to add texture successfully without just making it a plain colour so i added squiggles and lines to add colour


this is the finalised texture for my barrel once all the height and tree texture had been added on top of my previous screenshot i added into my blog earlier I’m really happy with how it looks and i think it looks good, like a wooden texture.


this is my final texture for my house, i wanted to reinforce the middle eastern theme so i looked at some typical designs and added this to the best of my resources.


these are my water plants, i originally didn’t want any colour in my diorama within plant life but i also wanted some contrast towards the repeating beige and sandy theme so i opted to add a hint of colour into some aspect and i am really happy with how it looks, i think it adds a nice pop to my pond and i had a lot of fun texturing the model.


during the process of trying to import my models and my texture, i faced troubles with my original blockout so i had to remake it. this worked out in my favour so i was able to redo my camera movement and complete it properly. I also was able to create my space more to how i want it to look however my final design still did change from my blockout.

This is my progress with adding all my models I have changed the background since the default sky and mountains weren’t necessary. and beneath, in my contents drawer you can see my folders for arrangement which hold all my models and texture for each part.
building my model:







this is screenshots of my whole entire model fully put together and textured and background added I think it looks really good and I’m really proud of it. I think everything ties together really well and I’m happy with how all my textures look together in the full diorama. the models were simple to add but you have to add them as an fbx and its good to make sure you group a model that is built up of many different models so they come into unreal as one model rather than lots of different ones.



This shows how I added my textures into unreal engine, you have to prove the base material, the normal and the roughness/metallic and connect those three things to the guid it supplies you once you have created a new material show in the pop up in the screen shots above, once done you press apply and save and you have a texture to use on models in unreal.
rendering my video
(No date) Bing. Available at: https://www.bing.com/videos/riverview/relatedvideo?q=how%2Bto%2Bbrighten%2Blights%2Bin%2Bafter%2Beffects&mid=47602F2BE3337AA2E64847602F2BE3337AA2E648&churl=https%3A%2F%2Fwww.youtube.com%2Fchannel%2FUCmAOUHpaMTPapYl5GTqMmJw&FORM=VIRE (Accessed: 13 May 2026).
This is a video I tried to follow when rendering my video in after effects however I didn’t like how the lighting changed my video so I decided not to add those changes to my work and kept it as it was rendered by itself, unfortunately I lost the screenshots of that process. but the rendering was a simple process and it didn’t take me long to complete.